HK OLM 0.75 210 A

Membr. hranil. 0,75L 210bar

The product image may differ

Tip

Prostornina plina l

0,75 l

p maks.

210 bar

Prenos datoteke PDF

Izberite izvedbo

Prikaži tabelo artiklov

HK OLM 0.075 250 A HK OLM 0.16 250 A HK OLM 0.32 210 A HK OLM 0.5 210 A HK OLM 0.75 210 A HK OLM 0.75 350 A HK OLM 1.0 210 A HK OLM 1.4 140 A HK OLM 1.4 210 A HK OLM 2.0 100 A HK OLM 2.0 250 A HK OLM 2.8 250 A HK OLM 3.5 250 A

Podrobnosti o izdelku za

HK OLM 0.75 210 A

Tip

Prostornina plina l

0,75 l

p maks.

210 bar

pma : p0

8:1

p maks - p min

175 bar

169 mm

22 mm

G 1/2″ -14

41 mm

Ø D

124 mm

Ø G

34 mm

Vse lastnosti

Lastnosti

Material

tip 1: membrana NBR
tip 2: membrana ECO

Način izdelave

zaželen navpični vgradni položaj, plinska stran zgoraj

Območje uporabe

Energy storage
Emergency actuation
Leak oil and volume compensation
Shock absorption and pulsation damping
Suspension of vehicles

Priključki

oljna stran tipa A - notranji navoj

Temp. območje

tip 1: -10 °C do +80 °C
tip 2: -40 °C do +80 °C

Številka carinske tarife

84798997

Vse lastnosti

Opis izdelka

Opombe

CE-oznaka za membranske hranilnike > s prostornino plina 1,0 l
Delovni tlak 100 do 350 bar, min. delovni tlak mora presegati polnilni tlak plina za 10 %
Največji tlak polnjenja s plinom 130 barov

Opis

As liquids are practically incompressible, the compressibility of a gas (in this case nitrogen) is used in hydraulic accumulators to store energy.
A hydraulic accumulator consists of two chambers (liquid side and gas side), which are separated by a flexible, gas-tight element. The liquid side is connected to the hydraulic circuit of the system. When the pressure in the system rises, the accumulator is filled with oil and the gas is compressed. If the pressure drops, the stored pressurised liquid is forced back into the circuit by expansion of the compressed gas.

Opomba za naročilo

Tlačni hranilniki se iz skladišča dobavijo prazni. Pri polnjenju z N2 po želji kupca nastanejo dodatni stroški.