Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

K-DVST MIT REGLER

Pressure booster with regulator
Korpus
aluminium anodised 
Montaaž
any position, with 4 mounting holes 
P2:P1
1:1 to 1.6:1 
PDF-faili allalaadimine

Palun valige versioon

Kuva artiklitabel

Omadused

Korpus
  • aluminium anodised 
Montaaž
  • any position, with 4 mounting holes 
P2:P1
  • 1:1 to 1.6:1 
Sisendrõhk
  • 2 - 10 bar 
Temperatuuri ulatus
  • -10 °C to +50 °C (piston diameter 40 mm), -10 °C to +60 °C (piston diameter 63 mm) 
Tihend
  • NBR 
Toru
  • profile tube from aluminium, anodised 
Vahendid
  • filtered, unlubricated or lubricated compressed air. Please pay attention to continuous lubrication. 
Väljundrõhk
  • Max. 20 bar (regulated: max. 16 bar) 
Customs tariff number
  • 84209900 
Kõik omadused

Tootekirjeldus

Märkused
Lisaandmed saate soovi korral.
Specifications for calculating the fill time for the different container sizes can be found on the data sheet
Kirjeldus
Pressure multipliers (boosters) allow a separate compressed air store with up to double pressure to be installed for selected devices in a compressed air system without an external energy source, i.e. it is possible to work with a maximum pressure of 20 bar in a standard 10 bar system (maximum ratio 2:1). This is achieved using a double piston, which is operated by a combination of integrated check valves in such a way that the booster works automatically until the target pressure is reached in a compressed air tank and is then automatically switched off. A tank is always required to build up the pressure and store the compressed air!
Lisateave
Fixing bracket with nut
Pressure regulators with plastic body

Product variants

2 Results
Mõõtmejoonis
Nimetus
Keermesisend
H (mm)
Kolbide Ø (mm)
L (mm)
Üksikasjad / items
G 1/8″ -28 
139 mm
40 mm
194 mm
Lisateave
G 3/8″ -19 
183 mm
63 mm
290 mm
Lisateave

Column selection

Keermesisend
H (mm)
Kolbide Ø (mm)
L (mm)